View BXB100-48S05FLT_444359.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

BXB100 Series
DC/DC CONVERTERS * * * * * * * * * Industry standard footprint High power density (36.5W/in3) MTBF >1.4 million hours (Bellcore 332) Input voltage to ETS300-132-2 Adjustable output voltage No minimum load required Separate case ground pin Undervoltage lockout (UVLO) UL, VDE and CSA safety approvals
Single output
66-100W Wide Input DC/DC Converters 1
The BXB100 Series are high power density DC/DC converters packaged in the industry standard footprint (2.40 x 2.28 x 0.50 inches) to give designers optimum choices when specifying for both new and replacement designs. Suitable for a wide range of applications in nearly any industry, the BXB100 was particularly designed with communication and distributed power applications in mind. Using Bellcore 332, the MTBF is greater than 1,400,000 hours. Aluminum baseplate technology with four threaded M3 inserts makes heatsink attachment and optimum thermal management easy. The BXB100 series are approved to IEC950 by UL, CSA and VDE.
2 YEAR WARRANTY All specifications are typical at nominal input, full load at 25C unless otherwise stated
SPECIFICATIONS
OUTPUT SPECIFICATIONS Voltage adjustability Set point accuracy Line regulation Load regulation Minimum load Overshoot Undershoot Ripple and noise (5Hz to 20MHz) (See Note 1) Temperature coefficient Transient response (See Note 2) Remote sense INPUT SPECIFICATIONS Input voltage range Input current Input current (max.) (See Note 4) Input reflected ripple 24Vin nominal 48Vin nominal No load Remote OFF 48V models (See Note 6) 18 to 36VDC 36 to 75VDC 100mA max. 20mA max. 4A max. @ Io max. and Vin = 0 to 75V 5mA pk-pk (See Note 7) Open collector ref to -input 1.2VDC max. Open circuit 3.3V and 5V 12V and 15V At turn-on and turn-off Low line to high line Full load to min. load 60% to 110% 1.0% 0.05% 0.10% 0% None None 75mV pk-pk, 20mV rms 100mV pk-pk, 30mV rms 0.01%/C 2.0% max. deviation 170s recovery to within 1.0% 0.5VDC transmission line drop compensation
INPUT SPECIFICATIONS (continued) Undervoltage lockout 24Vin: 24Vin: 48Vin: 48Vin: power power power power up down up down 17V 16V 34V 32.5V 20ms 20ms
Start-up time (See Note 8)
Power up Remote ON/OFF
EMC CHARACTERISTICS Conducted emissions (See Note 3) EN55022 (See Note 3) FCC part 15 EN55022, CISPR22 Level A Level A Level A
GENERAL SPECIFICATIONS Efficiency Isolation voltage Input/case Input/output Output/case Fixed See table 1500VDC 1500VDC 1500VDC 500kHz typ. VDE0805, EN60950, IEC950 UL1950, CSA C22.2 No. 950 Aluminum baseplate with plastic case UL94V-0 110g (3.88oz) Bellcore 332 MIL-HDBK-217F @ 40C, 100% load 1,400,000 hours 580,000 hours min.
Switching frequency Approvals and standards (See Note 5) Case material Material flammability Weight MTBF
ENVIRONMENTAL SPECIFICATIONS Thermal performance Altitude Vibration Operating case temp. -40C to +100C Non-operating -55C to +125C Operating Non-operating 5Hz to 500Hz 10,000 feet max. 40,000 feet max. 2.4G rms (approx.)
Active low remote ON/OFF Logic compatibility ON OFF
File Name: BXB100S.PDF Rev: 02 Oct 2002
BXB100 Series
DC/DC CONVERTERS
OUTPUT POWER (MAX.) 66W 100W 66W 100W 100W 100W INPUT VOLTAGE 18-36VDC 18-36VDC 36-75VDC 36-75VDC 36-75VDC 36-75VDC OVP 4.3VDC 14.5VDC 4.3VDC 6.5VDC 14.5VDC 17.5VDC OUTPUT VOLTAGE 3.3V 12V 3.3V 5V 12V 15V
Single output
66-100W Wide Input DC/DC Converters 2
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
OUTPUT CURRENT (MIN.) 0A 0A 0A 0A 0A 0A
OUTPUT CURRENT (MAX.) 20A 8.33A 20A 20A 8.33A 6.67A
EFFICIENCY (TYP.) 77% 85% 78% 83% 86% 86%
REGULATION LINE 0.05% 0.05% 0.05% 0.05% 0.05% 0.05% LOAD 0.1% 0.1% 0.1% 0.1% 0.1% 0.1%
MODEL NUMBER (7) BXB100-24S3V3FLT BXB100-24S12FLT BXB100-48S3V3FLT BXB100-48S05FLT BXB100-48S12FLT BXB100-48S15FLT
Notes
1 2 3 4 5 6 7 Measured with 10F tantalum capacitor and 1F ceramic capacitor across output. di/dt = 0.1A/1s, Vin = 48VDC, Tc = 25C, load change = 0.5 lo max. to 0.75 lo max. and 0.75 Io max. to 0.5 Io max. Units should be characterised within systems. External components required. Input fusing is recommended based on surge current and maximum input current. This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. Simulated source impedance of 12H. 12H inductor in series with +Vin. Active high remote on/off option is available (standard product is active low), designate with the suffix `FHT' e.g. BXB100-48S05FHT. Consult factory for further details and options. Start-up into resistive load.
PROTECTION Short circuit protection Overvoltage protection Undervoltage protection Thermal protection TELECOM SPECIFICATION Central office interface A ETS300-132-2 Continuous, automatic recovery Non-latching Non-latching 110C baseplate, automatic recovery
8
PIN CONNECTIONS PIN NUMBER 1 2 3 4 5 6 7 8 9 FUNCTION + Vin Remote ON/OFF Case - Vin - Vout - Sense Trim + Sense + Vout
EXTERNAL OUTPUT TRIMMING Output can be externally trimmed by using the method shown.
8
TRIM UP 7 RT1 OR RT2 TRIM DOWN 6
www.artesyn.com
File Name: BXB100S.PDF Rev: 02 Oct 2002
BXB100 Series
DC/DC CONVERTERS
Single output
66-100W Wide Input DC/DC Converters 3
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
VIEW SHOWN PIN SIDE UP
1.90 (48.26) 0.500 (12.69) 0.010 (0.25)
CASE
0.190 (4.83) 0.010 (0.25)
0.200 (5.08) Min. Length for all Input and Output Pins
+SEN TRIM -SEN
1.000 (25.40) 0.400 (10.16) 1.400 (35.56)
VI (-)
Vo (-)
0.700 (17.77) 0.400 (10.16) 1.000 (25.40)
2.000 (50.80)
2.40 (60.96) Max.
ON/OFF
1.400 (35.56)
7 x O.040 (1.02) 0.002 (0.05) 0.190 (4.83) 0.010 (0.25) 2.28 (57.91) Max. 2 x O.080 (2.03) 0.002 (0.05) 4 x M3 x 0.5 Through 0.500 (12.70)
ALL DIMENSIONS IN INCHES (mm)
Tolerance : x.xx 0.02in. (0.51mm) x.xxx 0.010in. (0.254mm)
International Safety Standard Approvals
VDE0805/EN60950/IEC950 File No. 10401-3336-1095 UL1950 File No. E136005 CSA C22.2 No. 950 File No. LR41062C
Data Sheet (c) Artesyn Technologies(R) 2002 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.
Vo(+)
VI(+)
www.artesyn.com
File Name: BXB100S.PDF Rev: 02 Oct 2002

▲Up To Search▲

Price & Availability of BXB100-48S05FLT

	To Download BXB100-48S05FLT Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .